BenQ MP723 - XGA DLP Projector Uživatelský manuál stáhnout pdf (Strana 20)

Connection20

Connecting a monitor

If you want to view your presentation close-up on a monitor as well as on the screen, you

can connect the D-SUB OUT signal output socket on the projector to an external monitor

with a VGA or VGA to DVI-A cable by following the instructions below.

To connect the projector to a monitor (either through a VGA cable or VGA to

DVI-A cable):

The final connection path should be like that shown in the following diagram:

• With a VGA cable: • With a VGA to DVI-A cable:

Note: Your monitor must be equipped with

a DVI input socket.

1. Connect the projector to a computer as described in "Connecting a computer" on

page 18.

The D-SUB output only works when an appropriate D-SUB input is made to the

projector. Be sure the projector is connecting with the computer using the D-SUB/

COMP. IN socket, not the DVI socket.

2. Take a suitable VGA cable (only one

supplied) and connect one end of

the cable to the D-Sub input socket

of the video monitor.

3. Connect the other end of the cable

to the D-SUB OUT socket on the

projector.

2. Take a VGA to DVI-A cable and

connect the DVI end of the cable to

the DVI input socket of the video

monitor.

3. Connect the VGA end of the cable to

the D-SUB OUT socket on the

projector.

notebook or desktop

computer

(VGA)

(DVI)

iii

i. VGA to DVI-A cable

ii. VGA cable

iii. VGA cable

Downloaded From projector-manual.com BenQ Manuals

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 65 66

Žádné komentáře

BenQ MP723 - XGA DLP Projector Uživatelský manuál Strana 20